Thermal & Sensory Camera Kits

DJI Micro Cameras

DJI builds an array of multi-axis gimbal stabilized professional miniaturized payload cameras. With leading edge technology derived from internal R&D and added technology from HASSELBLAD of Sweden & FLIR thermal sensors from USA, the future of aerial vision is indeed possible.

zenmuse-vid1zenmuse-vid2
hasselblad-vid1hasselblad-vid2

3in1 Thermal Radiometric Gimbal

ProDrones proudly presents the 3in1 ‘one for all’ radiometric gimbal setup with dual camera setup, which allows you to have simultaneously daylight and thermal view. The 3in1 radiometric thermal gimbal with radiometric features is one of the most advanced thermal gimbals at this moment.

Compatible with:

  • DJI Phantom 4 (all models)
  • DJI Inspire 1 (all models)
  • DJI Inspire 2
  • DJI Matrice 100
  • DJI Matrice 200 (all models)
  • DJI Matrice 600

Radiometric Features
With the radiometric setup you are able to store video and radiometric images on an integrated microSD card. This way you can use FLIR TOOLS for afterwards analyzing and generate reports with use of the recorded radiometric images. Radiometric data is stored in Radiometric JPEGs with temperature data embedded in every pixels.

Auto Hotspot Detection
The ‘Automatic hotspot detection’ is an feature developed by DRONExpert Netherlands and only available on the 3in1 Radiometric thermal gimbal. When scanning the surface you will automatically be notified when an hotspot is detected. This is highlighted on the LCD screen with the measured temperature, but you also get an acoustic alarm on the FLIR touch controller (can be switched off). Threshold settings are fully adjustable with the LCD touch remote, which allows you to select the preferred temperature bandwidth, for example if you are searching for animals you can select different temperature bandwidth then when you are searching for bush fire. This feature is only available in combination with the Vue Pro R and FLIR long range LCD touch control unit

GPS Auto Hotspot Detection
Optionally the ‘auto hotspot detection’ can be upgraded with ‘GPS auto hotspot detection’. With this feature you can realtime monitor the GPS location of the detected hotspot (so not the GPS location of the drone, but the calculated GPS position of the hotspot itself). These GPS coordinates can also be stored for afterwards analysing. The ‘GPS automatic hotspot detection’ is ideal when you need to save the GPS locations of the hotspots, for example with bird nest/wildlife preservation.

FLIR LCD Touch Controller
With the included LCD touch controller you have full remotely control over the FLIR camera/gimbal. You are able to remotely control the: tilt, palettes, isotherm*, delta-t*, relatherm, color settings, automatic hotspot detection, start/stop recording, app mode, digital zoom and other settings. The controls is separately from the DJI RGB camera, so both cameras can be controlled separately. It is designed for use of 1 pilot or 2 pilots. It is also possible to add additional LCD receivers for extra thermal supervision.


FLIR Boson 640 sensor

Introducing the lightweight FLIR Boson thermal mount and sensor. The complete weight of the mount including camera is less then 65 Gram. Due this small payload the flight time of the uav’s is reduced to an minimum.

Compatible with:

  • Inspire 1
  • Inspire 2
  • Matrice 100
  • Matrice 200
  • Matrice 210
  • Matrice 600
  • Mavic Pro
  • Mavic Pro Platinum
  • Phantom 4
  • Phantom 4 Pro
  • Phantom 4 Pro+

The Boson mount is an excellent setup for hunters and spotting wildlife (f.e. fawns). Due the lightweight of the Boson mount you have an long flight time (longer then 20 minutes with dual camera setup). Its so easily to take along, which makes it an perfect tool for ‘Search and Rescue’.

Got your own Boson 320 sensor?
If you have your own FLIR Boson 320 sensor you can use this on our gimbal.

Dual screen:
With the setup you will have simultaneously daylight and thermal view. In most applications it is essential to have an combination with the daylight camera. The thermal is perfect for detection and the daylight camera is excellent for recognition.

Installation The installation can be done by yourself, we provide you with an instruction manual so you can follow the steps for an complete setup. If you dont want to install it yourself we can also provide the installation for you.

Included:

  • FLIR camera model Boson resolution 320 x 256
  • Mounting adapter for UAV
  • Integrated video transmitter (5.8Ghz)
  • 7″ LCD diversity receiver (thermal LCD receiver). Mounted on the DJI controller.
  • Buttons on backside of the mount for FLIR camera settings
  • Flight case (all parts all packed in flight case)

Optional:
Remote FLIR LCD touch control unit (remotely control FLIR Boson: Palettes, Tilt, Setting, Digital zoom, relatherm, start/stop recording)


FLIR Vue (Pro R) Mount

The lightweight FLIR Vue (Pro R) mount complete package weighs only 190 gram including all the parts (mount, transmitter, converters, cables, FLIR camera including storage module). Due the low payload, there is a minimal reduction in flight time.

Compatible with:

  • DJI Phantom 3 (all versions)
  • DJI Phantom 4 (all versions)
  • DJI Inspire 1 (all versions)
  • DJI Inspire 2
  • DJI Matrice 100
  • DJI Matrice 200/210
  • DJI Matrice 600
  • Yuneec Q500 (can be swapped with Yuneec RGB)
  • Yuneec H520 (contact DRONExpert for more info)

LCD Touchscreen Controller Option:
The FLIR Vue mount can optionally be expanded with the ‘FLIR long range LCD touch control unit’. The FLIR long range LCD touch control unit normally cost 1695 Euro, however in combination with the VUE (Pro R) mount the FLIR long range LCD touch control unit has more then 50% discount and has an additional price of 800 euro (total price 1995 euro for complete package). The FLIR long range LCD touch control unit gives the end user the possibility to (remotely) control: tilt, zoom, palettes, FLIR settings, start/stop recording, relatherm and set the threshold of the ‘Automatic Hotspot Detection’ (if camera is radiometric).

Specifications FLIR long range LCD touch control unit:

  • Longe Range, more then 2km
  • For all Flir camera with BlueTooth control (Vue Pro and Vue Pro R series)
  • Receiver module with integrated GPS/MAVlink output (optional)
  • Replacement for short range BT Flir UAS App
  • Easy Quick-release on DJI remote
  • Rechargeable integrated battery
  • Gimbal control by programmable buttons
  • USA 915,6MHZ / EU 869,5Mhz

Dual screen
With the setup you will have simultaneously daylight and thermal view. In most applications it is essential to have an combination with the daylight camera. The thermal is perfect for detection and the daylight camera is excellent for recognition.

Radiometric features:
With the radiometric camera combination (Vue Pro R) you are able to store video and radiometric images on an integrated microSD card. This way you can use FLIR TOOLS for afterwards analyzing and generate reports with use of the recorded radiometric images. Radiometric data is stored in Radiometric JPEGs with temperature data embedded in every pixels.

Automatic hotspot detection:
The ‘Automatic hotspot detection’ is an feature developed by DRONExpert Netherlands and only available on the 3in1 Radiometric thermal gimbal. When scanning the surface you will automatically be notified when an hotspot is detected. This is highlighted on the LCD screen with the measured temperature, but you also get an acoustic alarm on the FLIR touch controller (can be switched off). Threshold settings are fully adjustable with the LCD touch remote, which allows you to select the preferred temperature bandwidth, for example if you are searching for animals you can select different temperature bandwidth then when you are searching for bush fire. This feature is only available in combination with the Vue Pro R and FLIR long range LCD touch control unit.

Installation
The installation can be done by yourself, we provide you with an instruction manual so you can follow the steps for an complete setup. If you dont want to install it yourself we can also provide the installation for you.